Important to Know
Before using the information and data available on HWPure.com, please read the following disclaimer. This statement describes the scope, accuracy, and limitations of the benchmark data provided on this site.

1.    Scope of Discussion
The benchmark content and data presented on HWPure.com focuses only on synthetic testing (Synthesis Benchmark). This site does not include performance metrics for gaming or rendering.

2.    Self-Tested Data
All benchmark data available on HWPure.com is the result of independent testing conducted by the site manager. Each test is carefully conducted using a standardized methodology to ensure accuracy and consistency. The data presented reflects real performance observed under controlled conditions and is not influenced by external parties. HWPure.com is committed to delivering transparent and unbiased results that users can rely on.

3.    Limitation of Testing Results
All tests are conducted using a single unit of hardware tested from some of the many mass products on the market. The results shown cannot be used as a definitive benchmark for overall hardware performance, as performance may vary depending on system configuration, cooling solutions, and other environmental factors. For laptops, differences in system design and cooling can cause performance variations, even if the specifications are the same. Therefore, the test results are for reference only.

4.    Data Accuracy and Changes
All data published on HWPure.com comes from independently conducted tests. Maximum efforts are made to ensure the accuracy and reliability of the results, including avoiding anomalous data. However, test results are subject to change at any time due to hardware, software, or test method revisions. To improve accuracy and credibility, some benchmark results are integrated with external platforms such as Geekbench, HWBOT, and 3Dmark.

5.    Data Usage
The data presented on HWPure.com is for informational and reference purposes only. Users are allowed to use this data for personal and educational needs, but are prohibited from reproducing, distributing, or using it for commercial purposes without written permission from the site manager.

6.    Copyrights and Licenses
Some of the content contained on HWPure.com, including text, images, data, and graphics, is protected by copyright. Reuse or reproduction of part or all of the content without the express written permission of HWPure.com is a violation of law and may be prosecuted under applicable laws.

7.    Storage Media Testing
Storage media testing is performed using a single product sample from a mass-produced unit. Performance results may vary depending on capacity, hardware configuration, software, operating system, manufacturing differences, and other factors.

a. External Cases

Some hard disks and SSDs were tested using external cases, mainly from brands such as Orico, Taffware, and others, which use a USB 3.0 interface for optimal speed. Products tested using external cases are identified through the included hardware images.

b. MicroSD and SD Cards
Tests on MicroSD and SD cards are performed using card readers with USB 3.0 interface, including but not limited to VENTION Card Reader (GL3224 Controller) and LEXAR Card Reader RW450 rev B (GL3231S Controller) in the future may use different card readers, therefore we include the card reader usage on each memory card. Performance may differ when using the built-in card reader or USB 2.0 interface, which has a lower transfer rate.

8.    Special Considerations
a. RAM Disk and VRAM Disk, although not permanent storage media, are included in the test as they can store data temporarily with the help of certain software.

b. Storage devices of unclear origin (e.g., unbranded or mislabeled devices) are tested using H2testw software to verify the advertised capacity. Devices that fail verification will be excluded from the data and considered unfit for use as storage media.

9.    Information and Data Accuracy
The information and benchmark data provided on HWPure.com are based on tests performed in-house and are results obtained under controlled conditions. While we strive to achieve accuracy and consistency, actual performance may vary depending on system configuration, environmental factors, and other variables.

10.    Independence and Transparency
HWPure.com is committed to maintaining complete independence in its testing process. All testing is conducted without sponsorship or influence from hardware manufacturers or third parties. This ensures that published data is an accurate representation of hardware performance under real conditions, thus providing users with reliable and unbiased information.

11.    Liability
The information contained on this site is provided for informational purposes only. HWPure.com and its managers make no warranties as to the completeness, accuracy, or reliability of the data presented. Users are advised to use their discretion and judgment in utilizing the information provided. HWPure.com is not liable for any losses, damages, or decisions made based on the use of this site.

12.    Support and Contact
For questions or concerns, please contact us through the channels provided on our website.